| Standard Packaging: | DRUM |
| Delivery Period: | 5-8 work day |
| Supply Capacity: | 10000 tons a year |
Catalyst PC-8 (also known as DMCHA) is a colorless liquid with a characteristic amine odor. As a tertiary amine, PC-8 is used primarily to promote the urethane (polyol-isocyanate) reaction in a wide range of rigid foam applications.
Catalyst PC-8; Catalyst PC8; Polyurethane Catalyst PC-8; Hard Foam Catalyst PC8; Hard Foam Catalyst PC-8; N,N-Dimethylcyclohexanamine; Polycat 8; Niax C8; Dimethylaminocyclohexane; N,N-Dimethylaminocyclohexane; Cyclohexanamine, N,N-dimethyl-; KL3
| Appearance | Colorless Liquid |
|---|---|
| Solubility | Slightly soluble in water |
| Viscosity at 25°C | 2 |
| Relative Density at 20°C (g/cm³) | 0.85 |
| Flash Point (°C) | 60 |
| Boiling Point (°C) | 168–170 |
| Melting Point (°C) | −49 |
| Refractive Index at 20°C | 1.434 |
| Specific Gravity at 25°C (g/cm³) | −59°C |
| Calculated OH Number (mgKOH/g) | 0 |
DMCHA is used in a wide variety of rigid polyurethane and polyisocyanurate foam and non-foam applications. Its applications include insulation boards and appliance formulations.
Vicus/Vida's polyurethane catalysts are chemical compounds that accelerate the chemical reactions involved in the formation of polyurethane. They are auxiliary agents that serve to accelerate the reaction during the synthesis of polyurethane and its raw materials. The following is a comprehensive introduction regarding the PU catalyst.
| No. | Application | Production | Grade No. | Chemical Name | Features |
|---|---|---|---|---|---|
| 1 | Flexible Foam & Rigid Foam | Amine Catalyst | A-1 | Amine Catalyst A1 | Strong blowing catalysis; improved processability across a wide range of densities and formulations |
| 2 | Flexible Foam & Rigid Foam | Amine Catalyst | A 33 | Amine Catalyst A33 | Helps achieve excellent results in flexible foam formulations — especially with the |
| 3 | Flexible Foam & Rigid Foam | Amine Catalyst | BDMA | N,N-Dimethylbenzylamine | Used in PU rigid foam and flexible slabstock foam for curing, improved demold and reduced friability |
| 4 | Flexible Foam | Tin Catalyst | T9 | Tin(II) 2-ethylhexanoate | Used for the gelation reaction during the foaming of polyether-polyurethane; can also be used as an anti-aging agent for polyurethane foam |
| 5 | Flexible Foam | Foam Hardener | VH-60 | Foam Hardener | Especially suitable for high-load-bearing foams foamed with liquid carbon dioxide; used in combination with conventional polyols and polymer polyols to improve load-bearing capacity |
| 6 | Flexible Foam | Foam Hardener | VH-90 | Foam Hardener | Mainly used in the production of flexible polyether block foams; effectively increases foam hardness |
| 7 | Flexible Foam | Foam Processor | V-442S | PU Processor | Decreases the odor of polyurethane foams; no effect on the VOC of final products; high compatibility with other additives |
| 8 | Rigid Foam | PMDETA | PC5 | Pentamethyldiethylenetriamine | Highly active catalyst for polyurethane reaction; mainly catalyzes the foaming reaction and is also used to balance overall foaming and gelation |
| 9 | Rigid Foam | DMCHA | PC8 | N,N-Dimethylcyclohexylamine | Standard gel catalyst; effective but strong smell |
| 10 | Rigid Foam | Amine Catalyst | PC41 | N,N',N''-Dimethylaminopropylhexahydrotriazine | Versatile catalyst, mainly used for improved cure in appliance; highly active trimerization co-catalyst with excellent foaming properties, typically used in combination with other catalysts |
| 11 | Rigid Foam | Trimerization Catalyst | PC46 | Potassium Acetate | Promotes isocyanurate reaction (trimerization catalyzed reaction) in PIP system of polyurethane rigid foams; can be used in various rigid foams |
| 12 | Rigid Foam | Amine Catalyst | PC77 | Pentamethyldipropylenetriamine | Gel catalyst; helps improve friability |
| 13 | Rigid Foam | Potassium Octoate Catalyst | K15 | Potassium 2-ethylhexanoate | Excellent chemical stability; stable acid value and molecular weight with good catalytic effect |
| 14 | Rigid Foam | Amine Catalyst | DABCO VT-31 | Amine Catalyst | Shortened foam curing duration and higher production rates |
| 15 | Rigid Foam & Flexible Molded Foam | Amine Catalyst | DABCO VT-2 | 2-Hydroxy-N,N,N-Trimethyl-1-Propylamine Formate | Excellent trimerization catalyst and high isocyanate conversion; provides more delayed action and improved curing |
| 16 | Rigid Foam & CASE | Tin Catalyst | DBTDL T12 | Dibutyltin Dilaurate | Accelerates the connection of individual reaction partners to reduce curing time |
| 17 | HR Foam | Amine Catalysts | VS-300 | Delayed Amine Catalyst | Improved flow in the mold and easier production of complex products |
| 18 | HR Foam | Amine Catalysts | VS-400 | Delayed Amine Catalyst | Delayed blowing catalyst; applicable to HR cold molded foam, especially for car seats |
| Standard Packaging: | DRUM |
| Delivery Period: | 5-8 work day |
| Supply Capacity: | 10000 tons a year |
Catalyst PC-8 (also known as DMCHA) is a colorless liquid with a characteristic amine odor. As a tertiary amine, PC-8 is used primarily to promote the urethane (polyol-isocyanate) reaction in a wide range of rigid foam applications.
Catalyst PC-8; Catalyst PC8; Polyurethane Catalyst PC-8; Hard Foam Catalyst PC8; Hard Foam Catalyst PC-8; N,N-Dimethylcyclohexanamine; Polycat 8; Niax C8; Dimethylaminocyclohexane; N,N-Dimethylaminocyclohexane; Cyclohexanamine, N,N-dimethyl-; KL3
| Appearance | Colorless Liquid |
|---|---|
| Solubility | Slightly soluble in water |
| Viscosity at 25°C | 2 |
| Relative Density at 20°C (g/cm³) | 0.85 |
| Flash Point (°C) | 60 |
| Boiling Point (°C) | 168–170 |
| Melting Point (°C) | −49 |
| Refractive Index at 20°C | 1.434 |
| Specific Gravity at 25°C (g/cm³) | −59°C |
| Calculated OH Number (mgKOH/g) | 0 |
DMCHA is used in a wide variety of rigid polyurethane and polyisocyanurate foam and non-foam applications. Its applications include insulation boards and appliance formulations.
Vicus/Vida's polyurethane catalysts are chemical compounds that accelerate the chemical reactions involved in the formation of polyurethane. They are auxiliary agents that serve to accelerate the reaction during the synthesis of polyurethane and its raw materials. The following is a comprehensive introduction regarding the PU catalyst.
| No. | Application | Production | Grade No. | Chemical Name | Features |
|---|---|---|---|---|---|
| 1 | Flexible Foam & Rigid Foam | Amine Catalyst | A-1 | Amine Catalyst A1 | Strong blowing catalysis; improved processability across a wide range of densities and formulations |
| 2 | Flexible Foam & Rigid Foam | Amine Catalyst | A 33 | Amine Catalyst A33 | Helps achieve excellent results in flexible foam formulations — especially with the |
| 3 | Flexible Foam & Rigid Foam | Amine Catalyst | BDMA | N,N-Dimethylbenzylamine | Used in PU rigid foam and flexible slabstock foam for curing, improved demold and reduced friability |
| 4 | Flexible Foam | Tin Catalyst | T9 | Tin(II) 2-ethylhexanoate | Used for the gelation reaction during the foaming of polyether-polyurethane; can also be used as an anti-aging agent for polyurethane foam |
| 5 | Flexible Foam | Foam Hardener | VH-60 | Foam Hardener | Especially suitable for high-load-bearing foams foamed with liquid carbon dioxide; used in combination with conventional polyols and polymer polyols to improve load-bearing capacity |
| 6 | Flexible Foam | Foam Hardener | VH-90 | Foam Hardener | Mainly used in the production of flexible polyether block foams; effectively increases foam hardness |
| 7 | Flexible Foam | Foam Processor | V-442S | PU Processor | Decreases the odor of polyurethane foams; no effect on the VOC of final products; high compatibility with other additives |
| 8 | Rigid Foam | PMDETA | PC5 | Pentamethyldiethylenetriamine | Highly active catalyst for polyurethane reaction; mainly catalyzes the foaming reaction and is also used to balance overall foaming and gelation |
| 9 | Rigid Foam | DMCHA | PC8 | N,N-Dimethylcyclohexylamine | Standard gel catalyst; effective but strong smell |
| 10 | Rigid Foam | Amine Catalyst | PC41 | N,N',N''-Dimethylaminopropylhexahydrotriazine | Versatile catalyst, mainly used for improved cure in appliance; highly active trimerization co-catalyst with excellent foaming properties, typically used in combination with other catalysts |
| 11 | Rigid Foam | Trimerization Catalyst | PC46 | Potassium Acetate | Promotes isocyanurate reaction (trimerization catalyzed reaction) in PIP system of polyurethane rigid foams; can be used in various rigid foams |
| 12 | Rigid Foam | Amine Catalyst | PC77 | Pentamethyldipropylenetriamine | Gel catalyst; helps improve friability |
| 13 | Rigid Foam | Potassium Octoate Catalyst | K15 | Potassium 2-ethylhexanoate | Excellent chemical stability; stable acid value and molecular weight with good catalytic effect |
| 14 | Rigid Foam | Amine Catalyst | DABCO VT-31 | Amine Catalyst | Shortened foam curing duration and higher production rates |
| 15 | Rigid Foam & Flexible Molded Foam | Amine Catalyst | DABCO VT-2 | 2-Hydroxy-N,N,N-Trimethyl-1-Propylamine Formate | Excellent trimerization catalyst and high isocyanate conversion; provides more delayed action and improved curing |
| 16 | Rigid Foam & CASE | Tin Catalyst | DBTDL T12 | Dibutyltin Dilaurate | Accelerates the connection of individual reaction partners to reduce curing time |
| 17 | HR Foam | Amine Catalysts | VS-300 | Delayed Amine Catalyst | Improved flow in the mold and easier production of complex products |
| 18 | HR Foam | Amine Catalysts | VS-400 | Delayed Amine Catalyst | Delayed blowing catalyst; applicable to HR cold molded foam, especially for car seats |