| MOQ: | 1 Ton |
| Price: | USD 2,000-6,000 / Ton |
| Standard Packaging: | Steel drum / pail, or customized export packaging as agreed |
| Delivery Period: | 7-15 working days after deposit |
| Payment Method: | T/T,L/C,Western Union |
| Supply Capacity: | 300 Tons per Month |
VEP-01 is a high-permeability epoxy resin grouting material with very low viscosity and excellent perfusion, able to fill seams narrower than 0.02 mm. After curing, its compressive and tensile strengths are very good, giving a strong reinforcing and strengthening effect on cracked concrete.
Fine micro-cracks are difficult to fill but are common paths for water and for loss of structural integrity. Because the epoxy has high bond strength to concrete — generally greater than the tensile strength of the concrete itself — the repaired section works as a monolithic structure once more.
VEP-01 is a two-component system mixed evenly at a 4:1 ratio, then injected. Solidification time can be adjusted within 1–5 hours, and the A/B components require no complicated preparation. It has a complete curing time of 24 hours and a six-month shelf life under proper storage.
| Item | Typical Value |
|---|---|
| Density (20 °C) | 1.05–1.20 g/cm³ |
| Initial Viscosity (25 °C) | ≤200 mPa·s |
| Operable Time | >30 min |
| Compressive Strength (7d) | ≥70 MPa |
| Tensile Strength | ≥15 MPa |
| Bond Strength (Dry) | ≥4.0 MPa |
| Bond Strength (Wet) | ≥2.5 MPa |
| Impervious Pressure | ≥1.2 MPa |
With its low viscosity and good perfusion, VEP-01 can fill seams narrower than 0.02 mm. This makes it effective on the fine micro-cracks that weaker grouts cannot reach, restoring both water tightness and structural continuity.
The two components are mixed at a 4:1 ratio, and the solidification time can be adjusted within a range of 1–5 hours. The body compressive strength after 7 days is at least 70 MPa, with a complete curing time of around 24 hours.
It is supplied as a two-component epoxy system and should be stored in a cool, dry place per the standard conditions of 15–30 °C, away from direct sunlight. Properly stored, it has a shelf life of about six months.
Micro-cracks need a grout that can actually enter them. VEP-01's ultra-low viscosity and high bond strength fill the finest seams and restore structural integrity.
For micro crack structural sealing, every batch is supplied with a certificate of analysis, and our technical team supports grade selection, site trials, and after-sales troubleshooting. Custom packaging and private-label supply are available for distributors and brand owners.
Note: The data above are typical values tested by our company and are for professional reference only. A site trial is recommended to confirm the exact grade and dosage before full-scale application.
| MOQ: | 1 Ton |
| Price: | USD 2,000-6,000 / Ton |
| Standard Packaging: | Steel drum / pail, or customized export packaging as agreed |
| Delivery Period: | 7-15 working days after deposit |
| Payment Method: | T/T,L/C,Western Union |
| Supply Capacity: | 300 Tons per Month |
VEP-01 is a high-permeability epoxy resin grouting material with very low viscosity and excellent perfusion, able to fill seams narrower than 0.02 mm. After curing, its compressive and tensile strengths are very good, giving a strong reinforcing and strengthening effect on cracked concrete.
Fine micro-cracks are difficult to fill but are common paths for water and for loss of structural integrity. Because the epoxy has high bond strength to concrete — generally greater than the tensile strength of the concrete itself — the repaired section works as a monolithic structure once more.
VEP-01 is a two-component system mixed evenly at a 4:1 ratio, then injected. Solidification time can be adjusted within 1–5 hours, and the A/B components require no complicated preparation. It has a complete curing time of 24 hours and a six-month shelf life under proper storage.
| Item | Typical Value |
|---|---|
| Density (20 °C) | 1.05–1.20 g/cm³ |
| Initial Viscosity (25 °C) | ≤200 mPa·s |
| Operable Time | >30 min |
| Compressive Strength (7d) | ≥70 MPa |
| Tensile Strength | ≥15 MPa |
| Bond Strength (Dry) | ≥4.0 MPa |
| Bond Strength (Wet) | ≥2.5 MPa |
| Impervious Pressure | ≥1.2 MPa |
With its low viscosity and good perfusion, VEP-01 can fill seams narrower than 0.02 mm. This makes it effective on the fine micro-cracks that weaker grouts cannot reach, restoring both water tightness and structural continuity.
The two components are mixed at a 4:1 ratio, and the solidification time can be adjusted within a range of 1–5 hours. The body compressive strength after 7 days is at least 70 MPa, with a complete curing time of around 24 hours.
It is supplied as a two-component epoxy system and should be stored in a cool, dry place per the standard conditions of 15–30 °C, away from direct sunlight. Properly stored, it has a shelf life of about six months.
Micro-cracks need a grout that can actually enter them. VEP-01's ultra-low viscosity and high bond strength fill the finest seams and restore structural integrity.
For micro crack structural sealing, every batch is supplied with a certificate of analysis, and our technical team supports grade selection, site trials, and after-sales troubleshooting. Custom packaging and private-label supply are available for distributors and brand owners.
Note: The data above are typical values tested by our company and are for professional reference only. A site trial is recommended to confirm the exact grade and dosage before full-scale application.