| MOQ: | 1 Ton |
| Price: | USD 2,000-6,000 / Ton |
| Standard Packaging: | Steel drum / pail, or customized export packaging as agreed |
| Delivery Period: | 7-15 working days after deposit |
| Payment Method: | T/T,L/C,Western Union |
| Supply Capacity: | 300 Tons per Month |
VCO-2 is a high bond strength polyurethane grouting material engineered specifically for tunnel lining repair and karst water sealing. Its high adhesion and mechanical strength bond firmly to both the lining and rock mass, while the swelling action effectively seals karst and fractured water in tunnels and operating tunnels.
Tunnels frequently face karst and fractured water that seeps through linings and joints. VCO-2's low viscosity allows it to penetrate fractures before swelling, and its toughness enables it to adapt to ground pressure over the long term, keeping the lining sealed and supported.
Components A and B are mixed at a 1:1 volume ratio in a dedicated grouting pump and injected through a special grouting gun. The pump must be cleaned immediately after construction. VCO-2 is packed in 25 kg and 200 kg drums with a shelf life exceeding six months.
| Item | Typical Value |
|---|---|
| Appearance (A/B) | Light Yellow / Dark Brown Transparent Liquid |
| Density (20°C) | A 1.1 / B 1.2 g/cm³ |
| Viscosity (20°C) | 200–400 mPa·s |
| Mixing Ratio | 1:1 (volume) |
| Reaction Start | 60 ± 10 s |
| Reaction End | 300 s |
| Expansion Ratio (with water) | >15 |
| Compressive Strength | ≤40 MPa |
The low-viscosity resin penetrates the fracture and, on contact with water, swells to block the flow channel. This makes it effective on karst and fractured water in tunnels, and on seepage in operating tunnels where access is limited.
The cured material has good toughness and high bond strength, so it adapts to long-term ground pressure effects instead of cracking away. This keeps both the seal and the reinforcement of the tunnel lining effective over time.
Mix components A and B at a 1:1 volume ratio in a dedicated pump, inject through a grouting gun, and clean the pump immediately. Store the 25 kg and 200 kg drums away from moisture; sealed shelf life exceeds six months.
Tunnel linings need a strong, tough seal. VCO-2 bonds firmly and swells to block karst and fractured water, reinforcing the lining while keeping the tunnel dry.
For tunnel lining and karst water repair, every batch is supplied with a certificate of analysis, and our technical team supports grade selection, site trials, and after-sales troubleshooting. Custom packaging and private-label supply are available for distributors and brand owners.
Note: The data above are typical values tested by our company and are for professional reference only. A site trial is recommended to confirm the exact grade and dosage before full-scale application.
| MOQ: | 1 Ton |
| Price: | USD 2,000-6,000 / Ton |
| Standard Packaging: | Steel drum / pail, or customized export packaging as agreed |
| Delivery Period: | 7-15 working days after deposit |
| Payment Method: | T/T,L/C,Western Union |
| Supply Capacity: | 300 Tons per Month |
VCO-2 is a high bond strength polyurethane grouting material engineered specifically for tunnel lining repair and karst water sealing. Its high adhesion and mechanical strength bond firmly to both the lining and rock mass, while the swelling action effectively seals karst and fractured water in tunnels and operating tunnels.
Tunnels frequently face karst and fractured water that seeps through linings and joints. VCO-2's low viscosity allows it to penetrate fractures before swelling, and its toughness enables it to adapt to ground pressure over the long term, keeping the lining sealed and supported.
Components A and B are mixed at a 1:1 volume ratio in a dedicated grouting pump and injected through a special grouting gun. The pump must be cleaned immediately after construction. VCO-2 is packed in 25 kg and 200 kg drums with a shelf life exceeding six months.
| Item | Typical Value |
|---|---|
| Appearance (A/B) | Light Yellow / Dark Brown Transparent Liquid |
| Density (20°C) | A 1.1 / B 1.2 g/cm³ |
| Viscosity (20°C) | 200–400 mPa·s |
| Mixing Ratio | 1:1 (volume) |
| Reaction Start | 60 ± 10 s |
| Reaction End | 300 s |
| Expansion Ratio (with water) | >15 |
| Compressive Strength | ≤40 MPa |
The low-viscosity resin penetrates the fracture and, on contact with water, swells to block the flow channel. This makes it effective on karst and fractured water in tunnels, and on seepage in operating tunnels where access is limited.
The cured material has good toughness and high bond strength, so it adapts to long-term ground pressure effects instead of cracking away. This keeps both the seal and the reinforcement of the tunnel lining effective over time.
Mix components A and B at a 1:1 volume ratio in a dedicated pump, inject through a grouting gun, and clean the pump immediately. Store the 25 kg and 200 kg drums away from moisture; sealed shelf life exceeds six months.
Tunnel linings need a strong, tough seal. VCO-2 bonds firmly and swells to block karst and fractured water, reinforcing the lining while keeping the tunnel dry.
For tunnel lining and karst water repair, every batch is supplied with a certificate of analysis, and our technical team supports grade selection, site trials, and after-sales troubleshooting. Custom packaging and private-label supply are available for distributors and brand owners.
Note: The data above are typical values tested by our company and are for professional reference only. A site trial is recommended to confirm the exact grade and dosage before full-scale application.